Hueforge Pair

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.1mmFilaments Used: PLA Smart Recycled Black Transmission Distance: 0.5 PLA Smart Recycled Dark Green Transmission Distance: 3.8 PLA Sunlu Matte Blue Transmission Distance: 8.4 PLA Smart Recycled Orange Transmission Distance: 5.7 PLA Smart Recycled Red Transmission Distance: 4.4 PLA Smart Recycled Yellow Transmission Distance: 9.3This print uses 6 unique filamentsSwap Instructions: Start with Black At layer #7 (0.64mm) swap to Dark Green At layer #9 (0.8mm) swap to Blue At layer #11 (0.96mm) swap to Orange At layer #12 (1.04mm) swap to Red At layer #15 (1.28mm) swap to Yellow for the rest.