Hueforge Ruffy

Ruffy Hueforge Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 270.9x270.9mm in size but u can change easly to 25x25 or lowerYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 3.5mm and the Actual Depth is 3.6mm Filaments Used:PLA PolyLite Black Transmission Distance: 0.3PLA+ Sunlu Red Transmission Distance: 6PLA+ Sunlu Orange Transmission Distance: 5PLA PolyLite White Transmission Distance: 5This print uses 4 unique filaments Swap Instructions:Start with BlackAt layer #10 (0.88mm) swap to RedAt layer #16 (1.36mm) swap to OrangeAt layer #22 (1.84mm) swap to White for the rest. Its my first try to create a Hueforge. Hope its working for you aswell <3