Hueforge Tecna

HUEFORGE TECNA WINXDi seguito i parametri di stampa: Project: tecna.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 133.33x200mm in sizeYou may print at higher layer heights below the Base Thickness of 0.48mmThe Max allowed Thickness is 2.24mm and the Actual Thickness is 1.99998mmFilaments Used: #000000 PLA BambuLab Basic Black Transmission Distance: 0.6 #aa00ff PLA+ Esun Magenta Transmission Distance: 4.5 #ff749e PLA+ Esun Pink Transmission Distance: 5 #ddd7c7 PLA+ Esun Bone White Transmission Distance: 5This print uses 4 unique filamentsSwap Instructions: Start with Black At layer #7 (0.64mm) swap to Magenta At layer #8 (0.72mm) swap to Pink At layer #14 (1.2mm) swap to Bone White for the rest. Boost MeUn boost è sempre gradito :)