Hueforge Tupac

Project: tupac.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 1.4mmFilaments Used: PLA smartfil negro Transmission Distance: 0.4 PLA smatfil azul oscuro Transmission Distance: 3 PLA smartfil pink Transmission Distance: 7.4 PLA smatfil White Transmission Distance: 6This print uses 4 unique filamentsSwap Instructions: Start with negro At layer #7 (0.64mm) swap to azul oscuro At layer #9 (0.8mm) swap to pink At layer #11 (0.96mm) swap to White for the rest.