Hueforge - Umbreon

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.2mmThe Model is 200x200mm in sizeYou may print at higher layer heights below the Base Thickness of 0.52mmThe Max allowed Thickness is 2.28mm and the Actual Thickness is 2.28mmFilaments Used: #080a0d PLA PolyLite Black Transmission Distance: 0.3 #4c5f71 PLA BambuLab Basic Blue Gray Transmission Distance: 3 #c00d1e PLA BambuLab Basic Red Transmission Distance: 4 #fce300 PLA BambuLab Basic Yellow Transmission Distance: 6This print uses 4 unique filamentsSwap Instructions: Start with Black At layer #11 (1mm) swap to Blue Gray At layer #14 (1.24mm) swap to Red At layer #21 (1.8mm) swap to Yellow for the rest.