HUEFORGE VECNA TENTACLES

HUEFORGE VECNA TENTACLES 200x200 and 300x300Projet: Vecna tentacles.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200x202.2mm in sizeYou may print at higher layer heights below the Base Thickness of 1.04mmThe Max allowed Thickness is 3.04mm and the Actual Thickness is 3.04mm #000000 PLA BambuLab Basic Black Transmission Distance: 0.6 #4c5f71 PLA BambuLab Basic Blue Gray Transmission Distance: 3 #ff1129 PLA BambuLab Basic Red Transmission Distance: 4 #ffffff PLA BambuLab Basic Jade White Transmission Distance: 5 #0000ab PLA BambuLab Basic Blue Transmission Distance: 4 #00aaff PLA Bambulab Cyan Transmission Distance: 5 #56b7e6 PLA BambuLab Matte Sky Blue Transmission Distance: 1.3This print uses 7 unique filamentsInstructions de changements: Commencer par Black At layer #13 (1.12mm) swap to Blue Gray At layer #14 (1.2mm) swap to Red At layer #17 (1.44mm) swap to Jade White At layer #23 (1.92mm) swap to Blue At layer #26 (2.16mm) swap to Cya