HueForge Wolf

Hier einmal ein Wolf im Hue Forge StylePrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 133.33x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 3mm and the Actual Depth is 2.2mm Filaments Used: PLA Bambu Black Transmission Distance: 0.3 PLA Bambu Basic Blue Gray Transmission Distance: 3 PLA Bambu Grey Transmission Distance: 1 PLA Bambu White Transmission Distance: 5This print uses 4 unique filamentsSwap Instructions: Start with Black At layer #8 (0.72mm) swap to Blue Gray At layer #13 (1.12mm) swap to Grey At layer #20 (1.68mm) swap to White for the rest.