MakerWorld

3D Printer Accessories

Hygrometer multiboard mount

by 3DBS · 3D Printer Accessories

28 Downloads

9 Likes

12 Makes

A simple mount that tilts away and down to hold your standard hygrometer. Requires a multiboard snap. Sits off the multiboard 50mm, holds a 45x26mm hydrometer. Supports needed, 2 walls 15% infill

Category

3D Printer Accessories

Source

MakerWorld

Published

20.01.2025

Updated

03.05.2026

What you need to print this: Intermediate Medium confidence

Why?

supports needed

Single piece Supports required

Supports 2/3

Assembly 0/3

Settings 1/3

Bed size 0/3

Post-process 0/3

Printer

FDM / FFF

File format

STL

Material

Min. bed size

45 mm (Small)

Software

Cura, PrusaSlicer, or similar

Frequently Asked Questions

Which 3D printer is suitable for Hygrometer multiboard mount?

Any FDM printer should handle Hygrometer multiboard mount just fine. It's been printed on machines like Bambu Lab A1 Mini, Prusa Mini+, Creality Ender 3, most FDM printers. A minimum build volume of 45 mm is recommended.

Does Hygrometer multiboard mount need supports when printing?

Yes, Hygrometer multiboard mount will probably need supports for the overhangs. Tree supports work well here and are easier to remove than regular ones.

What file format is Hygrometer multiboard mount available in?

Hygrometer multiboard mount is available in STL format. These files can be opened and sliced using free software such as Cura, PrusaSlicer, Bambu Studio, or OrcaSlicer for FDM printing, or ChiTuBox and Lychee Slicer for resin printing. The download is provided through MakerWorld.

Is Hygrometer multiboard mount free to download?

Yes, Hygrometer multiboard mount is available as a free download through MakerWorld. Always check the license on the original platform to understand commercial use, remixing, and attribution requirements.

No ratings yet

No comments yet – be the first!

Similar Models

6 Suggestions

Hygrometer multiboard mount

Similar Models

Add to Collection