Hyper Wiper

Wiper for the X1, P1 series printers. Using the A1 wiper pads and original wiper frame. After trying several other wipers that use the A1 wiper pads (not the A1-mini pads), I found them inadequate for keeping the nozzle clean Additionally, they were often the wrong position, interfering with the nozzle flinging filament around the inside of the printer Therefore, I decided design my own. One thing that took a while to figure out was that the wiper needs to be flexible. I kept experimenting with different filaments, designs, etc. Then I realized that the original wiper frame was perfect, being nice and flexible. It was just the PTFE tubing in the original wiper that was lacking. This results in a very small print (prints quickly). PLA is sufficient for use. All you need is a single order of Heatbed Nozzle Wiper - A1 and some CA glue (also known as Super Glue). When you place a single order of the A1 wiper pads, you will receive three strips.For this design, you need to cut the strips as