Thingiverse
Hypercube Evolution Insulated Enclosure
por Wayne91
72
Descargas
49
Likes
0
Makes
My design of a insulated enclosure for a standard Hypercube Evolution 3D Printer with an build volume of 300x300x300mm.
In my Hypercube i've included an extra space for the electronics in the bottom with 100mm extra heigth (Stand extrusion length 600mm).
3D Printed parts:
32 x Distance 10mm (for left and right enclosure plates)
13 x Distance 25mm (for rear enclosure plate)
4 x Distance hinge (for mounting the hinges to the front plate)
2 x Door handle
2 x Magnet holder
Parts what you need:
- 4 x Multi hinge for 30x30mm extrusion (https://www.ebay.de/itm/Scharnier-Kombischarnier-Kunststoff-30-30-nicht-aushangbar-48-x-59-mm-schwarz/251637007543?hash=item3a96bc04b7:g:HxkAAOSwVFlUCOz7)
- 4 x Magnet 12x8x2mm
- Insulating mat 10mm thickness (https://www.amazon.de/D%C3%A4mmschaummatte-selbstklebend-verschiedenen-Gr%C3%B6%C3%9Fen-1000x500x10mm/dp/B011L30X6K/ref=sr_1_17?ie=UTF8&qid=1531299576&sr=8-17&keywords=d%C3%A4mmschaummatte)
- M4 Screws
- M6 Screws
- M4 Nuts for 30x30 ex
In my Hypercube i've included an extra space for the electronics in the bottom with 100mm extra heigth (Stand extrusion length 600mm).
3D Printed parts:
32 x Distance 10mm (for left and right enclosure plates)
13 x Distance 25mm (for rear enclosure plate)
4 x Distance hinge (for mounting the hinges to the front plate)
2 x Door handle
2 x Magnet holder
Parts what you need:
- 4 x Multi hinge for 30x30mm extrusion (https://www.ebay.de/itm/Scharnier-Kombischarnier-Kunststoff-30-30-nicht-aushangbar-48-x-59-mm-schwarz/251637007543?hash=item3a96bc04b7:g:HxkAAOSwVFlUCOz7)
- 4 x Magnet 12x8x2mm
- Insulating mat 10mm thickness (https://www.amazon.de/D%C3%A4mmschaummatte-selbstklebend-verschiedenen-Gr%C3%B6%C3%9Fen-1000x500x10mm/dp/B011L30X6K/ref=sr_1_17?ie=UTF8&qid=1531299576&sr=8-17&keywords=d%C3%A4mmschaummatte)
- M4 Screws
- M6 Screws
- M4 Nuts for 30x30 ex
¿Has impreso este modelo? Inicia sesión y comparte tu make.
Inicia sesión para dejar un comentario
Iniciar sesiónAún no hay comentarios – ¡sé el primero!
