HyperCube Evolution Refurbishment 2022

After 2 long hard years of service I decided my HEVO needed some TLC.

Within the refurbishment I Klipperised the HEVO so I also had to revise my Electronics Enclosure design. The wire management of the HEVO is so much easier without a display.

The Parts I have revised are:

1.Easy Access Electronics Enclosure
2.PSU Stand Holder with Individual USB feed if required.
3.Wire Management Clip System to tidy up cables along the Extrusion slots.
4.Modified Z Axis Linear Rail Mount to allow cable pass through for End Stop Feeds.
5.New Flexible Hot End Mount with lots of fixing points rather than 3mm studs.
6.Manta MK2 & Boothy Mini Hot End assemblies (Primarily for the Dragon & Orbiter V1.5).
7.Revised Z motor Mount to increase Z height if required.

Video Here: https://www.youtube.com/watch?v=irDnK233_Uc

I have also revised the original mounting plate to include lots of fixing points for future proofing. I have included optional Hot Ends for Both My Manta MK2 design and a e