Hypercube Evolution Reinforced Bed Mode

Original Hypercube Evolution bed design is good but has too much printed parts and the margin error gets bigger with time.

I made an alternative by using a different design.

******************************************************************************************************
BOM:

- 4 X LMK12LUU Square Flange Linear Bearings

Link: https://www.aliexpress.com/item/32815741633.html?spm=a2g0s.9042311.0.0.2742b90aQeBMJw

- 2 X Lead Screw POM nut

Link: https://www.aliexpress.com/item/32825317686.html?spm=a2g0s.9042311.0.0.2742b90aBBxDNt

DON'T USE THE BRASS ones.

- 18 X M5x10mm Screw (To fix the metal plates)

- 16 X M4x10mm Screw (To fix the Linear Bearings)

- 4 X M3x10mm Screw (To fix the Lead Screw POM nut)

- 2 X 2020 Aluminium Profile 415mm (The existing profiles can be used)
- 3 X 2020 Aluminium Profile 255mm (The existing profiles can be used)

- 7 X 2020 Corner Angle L Brackets Connectors.

LINK: https://www.aliexpress.com/item/4000767697780.html