Iambic Paddles (Mini Version)

If you like what you see here, consider leaving a tip.

Remixed from an excellent design by Thingiverse user and certified amateur radio operator Loren Butler (V01PWF), the intent of this project was to make a set of 3D printable iambic paddles that were as portable as possible, while still comfortable enough to use at a desk. This is the mini version, designed to use 6-32 screws and be as compact as possible. Youtuber "AD6DM Dennis" reports that M3 screws can be used as an alternative. Unlike the previous two designs, all screws will need to be cut to the correct length detailed below. The narrow version of this key can be found here, and the base mountable version here.

Hardware Used:

2x 6-32 or M3 x 1 inch phillips flat pan head screws trimmed to 18mm thread length for paddle pivots
1x 6-32 or M3 x 1 inch phillips flat pan head screw trimmed to 21mm thread length for the ground contact/cover
2x 6-32 or M3 phillips flat pan head screws trimmed to 11.5mm thread length f