Thingiverse
Inductrix Frame
par Mr_Disintegrator
170
Téléchargements
113
Likes
1
Makes
Alternative frame for the Blade Inductrix indoor quadcopter. I made this design after having trouble finding a design that I could reliably print on my printer(s). My friends and I do little indoor obstacle races, and it is difficult to tell the tiny quads apart in the 'stock' colors.
You can use the stock canopy, or my custom canopy with fin. The fin provides a tiny bit more visibility.
The dark blue one is the 'normal' frame, which has 1mm thick walls. I printed it in ABS on my TAZ 5 with a 0.5mm nozzle.
The light blue one is the 'thin' frame for printing with a 0.4mm nozzle. Printed in PLA on my Monoprice Select Mini.
I use small blocks of foam attached to the bottoms of my motors to shield them from rough landings.
Short videos of it flying:
https://goo.gl/photos/HeY2yZgi1PdTUQf58
https://goo.gl/photos/qtokLHaDPX9A9tua8
You can use the stock canopy, or my custom canopy with fin. The fin provides a tiny bit more visibility.
The dark blue one is the 'normal' frame, which has 1mm thick walls. I printed it in ABS on my TAZ 5 with a 0.5mm nozzle.
The light blue one is the 'thin' frame for printing with a 0.4mm nozzle. Printed in PLA on my Monoprice Select Mini.
I use small blocks of foam attached to the bottoms of my motors to shield them from rough landings.
Short videos of it flying:
https://goo.gl/photos/HeY2yZgi1PdTUQf58
https://goo.gl/photos/qtokLHaDPX9A9tua8
Mr_Disintegrator publie également sur
3 modèles supplémentaires sur 1 autres plateformes
Vous avez imprimé ce modèle ? Connectez-vous et partagez votre make !
Connectez-vous pour laisser un commentaire
Se connecterPas encore de commentaires – soyez le premier !
