Info Orbs Case

I decided to make my own case for brett-tech's info orb kit found here: This design uses the straight headers for the displays soldered directly to the board (SEE IMAGES OF PCB). It also uses the risers/headers for the ESP32 board to give clearance. It does not use the USB port for the PCB, it is powered from the ESP32. This gives a slimmer assembly and puts the buttons on the same plane as the screens. The design has 2 variations:Uses a 1.7mm thick piece of polycarbonate to give it a nice seamless display surface. Link here. Skips the polycarbonate. (main body and front buttons are 1.7mm shorter. 3mF file contains parts for both on labeled bedplates. There is also a template to help cut the polycarbonate. Both designs use 2 M3x10mm countersunk screws for final assembly. These holes can edited in bambustudio if you want to secure it a different way. Assembly is simple: Place the body face down.insert PC insert with button cutout in the correct orientation.insert bezelinsert 3 large