intel NUC Case

Easy to print case for intel NUC.
The provided Front and Back are for D33217GKE.
You can use the side model to build front and back for other NUC versions.
Just use e.g. FreeCAD to cut the necessary holes into it.

Parts to print:
- top
- bottom
- 2x side
- front
- back
- 2x corner front
- 2x corner back (important: not symmetric -> need to use mirror for the second one)

For assembly you will need 12 around 5-10mm long M3 screws.
8 for the case itself and 4 for securing the mainboard in the case.