Thingiverse
Inverted Kick Trigger for E-Drum
von BeardyMike
32
Downloads
23
Likes
2
Makes
Blast Beater REJOICE!
==================
This is a Double Kick Variant of [RyoKosaka's Kick Trigger](https://www.thingiverse.com/thing:2553061).
RyoKosaka's doesn't work well with any of my double kick pedals, and I knew that if it was wider it would be perfect. Whilst modifying this part, I also added a recess to help newcomers with putting the piezo disc in place, and adjusted some of the geometry as stretching it caused the mesh to go a bit weird.
### Supports are a must for this print, and given the simple shape you can get away with as much as 0.28mm layer heights without issue.
To use this you'll need to either pick up some [inverted beaters](https://www.roland.com/uk/products/kdb-7/) or you can carefully bend some cheap ones into shape.
==================
This is a Double Kick Variant of [RyoKosaka's Kick Trigger](https://www.thingiverse.com/thing:2553061).
RyoKosaka's doesn't work well with any of my double kick pedals, and I knew that if it was wider it would be perfect. Whilst modifying this part, I also added a recess to help newcomers with putting the piezo disc in place, and adjusted some of the geometry as stretching it caused the mesh to go a bit weird.
### Supports are a must for this print, and given the simple shape you can get away with as much as 0.28mm layer heights without issue.
To use this you'll need to either pick up some [inverted beaters](https://www.roland.com/uk/products/kdb-7/) or you can carefully bend some cheap ones into shape.
BeardyMike veröffentlicht auch auf
6 zusätzliche Modelle auf 1 weiteren Plattformen
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!
