Iron man

Project: iron man 4.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 122.33x240mm in sizeYou may print at higher layer heights below the Base Thickness of 0.72mmThe Max allowed Thickness is 2.48mm and the Actual Thickness is 2mmFilaments Used: #000000 PLA BambuLab Basic Black Transmission Distance: 0.6 #c00d1e PLA BambuLab Basic Red Transmission Distance: 4 #8e9089 PLA BambuLab Basic Gray Transmission Distance: 2 #e7ceb5 PLA BambuLab Basic Beige Transmission Distance: 8 #ffffff PLA BambuLab Basic Jade White Transmission Distance: 5 #ff6a13 PLA BambuLab Basic Orange Transmission Distance: 7This print uses 6 unique filamentsSwap Instructions: Start with Black At layer #9 (0.8mm) swap to Red At layer #13 (1.12mm) swap to Black At layer #14 (1.2mm) swap to Gray At layer #16 (1.36mm) swap to Beige At layer #18 (1.52mm) swap to Jade White At layer #20 (1.68mm) swap to Orange At layer #21 (1.76mm) swap to Red for the rest.