Itachi grayscale

Project: kakashi escala de grises.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.24mmThe Model is 107.12x135.37mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 1.8mmFilaments Used: PLA+ Sunlu Silver Transmission Distance: 2 PLA+ Sunlu Black Transmission Distance: 0.6 PLA+ Sunlu White Transmission Distance: 5 PLA+ Sunlu Red Transmission Distance: 6This print uses 4 unique filamentsSwap Instructions: Start with Silver At layer #2 (0.32mm) swap to Black At layer #5 (0.56mm) swap to White At layer #13 (1.2mm) swap to Red for the rest.