Iwo Jima Flag Hueforge

Change line-type to Arachne for better detail. It takes a while longer to slice. Adjust the layer height for more or less color. This profile was best for me to show all colors of the flag and still look good. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 197.08x250mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.2mmFilaments Used:PLA PolyLite Black Transmission Distance: 0.3PLA BambuLab Basic Blue Transmission Distance: 4PLA BambuLab Basic Red Transmission Distance: 4PLA PolyLite White Transmission Distance: 5This print uses 4 unique filamentsSwap Instructions:Start with BlackAt layer #9 (0.8mm) swap to BlueAt layer #14 (1.2mm) swap to RedAt layer #18 (1.52mm) swap to White for the rest.