Jack Daniel's

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 100x150mm in sizeYou may print at higher layer heights below the Base Thickness of 0.24mmThe Max allowed Thickness is 2mm and the Actual Thickness is 1.92mmFilaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Red Transmission Distance: 4 PLA BambuLab Basic Pumpkin Orange Transmission Distance: 5.5 PLA BambuLab Basic Yellow Transmission Distance: 6 PLA BambuLab Basic White Transmission Distance: 6This print uses 5 unique filaments!!!! It appears you have mixed filament types. Be certain this is what you want. !!!!!Swap Instructions: Start with Black At layer #6 (0.56mm) swap to Red At layer #9 (0.8mm) swap to Pumpkin Orange At layer #13 (1.12mm) swap to Yellow At layer #16 (1.36mm) swap to White for the rest. Boost MeThanks for your support