JGAURORA A3S Reference Model

The frame is about the worst it can be due to the inaccurate and flexible joints and inaccurate and flexible sheet metal. I eventually converted this to a VORON Legacy, which required some parts you can get from my modified sourcing guide linked from my Unofficial Assembly Guide: [I built a 3D printer from DIY plans (VORON Legacy serial # request by poikilos_) + Assembly Manual](https://www.youtube.com/watch?v=o6qaTzRXmp8) on YouTube (link in description).


This (JGAURORA A3S V1 Reference Model 1.0) took about 48 hrs. I assume that we must not infringe on JGAURORA's intellectual property by manufacturing clones of the printer. However, I assume you can use it to:
- Make mods.
- Re-print or change the included stock-style parts in case they fail or you want to improve them (I made STL files of each)

If any stock parts do not have an STL file or they do not fit, please explain the exact problem in a comment, with measurements if possible. See "Print Settings" on this page before print