Thingiverse
Juno Pole Bracket
door cfastie
23
Downloads
19
Likes
1
Makes
The Juno Pole Bracket allows cameras to be attached to the top of a [Ron Thompson Gangster Carp Pole](http://store.publiclab.org/collections/mapping-kits/products/pole-mapping-kit). The carp pole has seven sections for a total length of 10.7 meters (35 ft). The Juno bracket can be used with five or six of the sections for a pole height of 8.1 or 9.4 m (26.6 or 30.8 feet, or shorter by removing lower sections).
The camera tray adjusts and locks at any angle for different types of aerial scene capture (stills or video). The camera tray has several 1/4" holes for mounting the camera with a thumb screw into the tripod socket.
The pole slides snugly into two clamps which grip the pole on the end where it has been reinforced with additional fiber and epoxy. Bushings fit into the clamps to allow the smaller (2nd smallest) pole section to fit.
Larger clamps and bushings are included for larger diameter poles. The standard clamps fit poles with diameters of 8.5mm and 14mm, and the opti
The camera tray adjusts and locks at any angle for different types of aerial scene capture (stills or video). The camera tray has several 1/4" holes for mounting the camera with a thumb screw into the tripod socket.
The pole slides snugly into two clamps which grip the pole on the end where it has been reinforced with additional fiber and epoxy. Bushings fit into the clamps to allow the smaller (2nd smallest) pole section to fit.
Larger clamps and bushings are included for larger diameter poles. The standard clamps fit poles with diameters of 8.5mm and 14mm, and the opti
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!
