Thingiverse
K1C Chain Riser
por Aer_itive
0
Descargas
2
Likes
0
Makes
3 Pieces (2 at Toolhead & 1 at back) to rise the chain.
Remix from:
https://www.printables.com/model/920992-creality-k1-k1c-k1se-front-chain-riser-12mm/files
Updated the heights and holes of each piece to better fit bolts instead of countersunk screws.
I needed this after upgrading the extruder on my K1C to the DXC, which rised the chain by about 15mm and kept poppoing out every print before installing these pieces.
Use a soldering iron to insert the threaded inserts into the parts.
BOM:
(2) M3x16 Bolts → Back_ChainRiser
(2) M3 Washers → Back_ChainRiser
(2) M3x4 Bolts → Bottom_ChainRiser & Top_ChainRiser
(2) M3x4x5 Threaded Insert → Bottom_ChainRiser & Top_ChainRiser
Remix from:
https://www.printables.com/model/920992-creality-k1-k1c-k1se-front-chain-riser-12mm/files
Updated the heights and holes of each piece to better fit bolts instead of countersunk screws.
I needed this after upgrading the extruder on my K1C to the DXC, which rised the chain by about 15mm and kept poppoing out every print before installing these pieces.
Use a soldering iron to insert the threaded inserts into the parts.
BOM:
(2) M3x16 Bolts → Back_ChainRiser
(2) M3 Washers → Back_ChainRiser
(2) M3x4 Bolts → Bottom_ChainRiser & Top_ChainRiser
(2) M3x4x5 Threaded Insert → Bottom_ChainRiser & Top_ChainRiser
¿Has impreso este modelo? Inicia sesión y comparte tu make.
Inicia sesión para dejar un comentario
Iniciar sesiónAún no hay comentarios – ¡sé el primero!
