K2 Plus CFS Buffer side mount

A side mount to relocate the CFS buffer for the K2 Plus. I did not really like the placement for the buffer at the rear of the printer. Additionally, it is not optimal for the bowden tube to be bent at a sharp angle if the CFS is placed to the right of the printer. This mount relocates the buffer to the right side of the printer and points it upwards to have an easier time to connect the CFS bowden to the buffer and then the output of the buffer to the printer. Nothing really special with the print settings as the buffer is pretty lightweight so any combo of layer heights / infill will work (I just did .28 layer and 15% infill). As the side mount attaches to the stock holes for the buffer at the reach of the printer, some slightly longer cap-head M3 screws are needed. I used some M3x16 mm screws that I had on hand. The buffer can be mounted 2 ways (so far). The version listed with the "thru hole" requires some M3 screws + nuts to attach. The "no thru hole" version allows you to screw in M3 screws directly. Please let me know if you would like any additional modification to this design to suit your specific mounting needs.