Slicer Discord
3DSEARCH / Cosplay Weapons / Karambit
Karambit – 3D printable model from MakerWorld MakerWorld
Cosplay Weapons

Karambit

by Just1engineer · Cosplay Weapons
63 Downloads
29 Likes
42 Makes
Go to Model
Just improving on some of the child produced products on here. This is sized for an adult male hand, can scale as needed. The image is of a PAHT-CF print annealed at 110c for 8 hours. Roughly 7x2inches. Printed on the finest settings an H2D can produce for this filament. Support on the tip for cleaner/sharper point is needed. Ensure good glue at ring or it may pop.
Category
Cosplay Weapons
Source
MakerWorld
Published
Updated
What you need to print this: Intermediate Medium confidence
Single piece
Supports 1/3
Assembly 0/3
Settings 1/3
Bed size 0/3
Post-process 1/3
Printer
FDM / FFF
File format
STL
Material
Carbon Fiber
Min. bed size
50 mm (Small)
Est. print time
8 h
Post-processing
Gluing
Software
Cura, PrusaSlicer, or similar
Frequently Asked Questions
Which 3D printer is suitable for Karambit?
Any FDM printer should handle Karambit just fine. It's been printed on machines like Bambu Lab A1 Mini, Prusa Mini+, Creality Ender 3, most FDM printers. A minimum build volume of 50 mm is recommended.
How long does it take to print Karambit?
According to the design notes, Karambit takes approximately 8 hours to print at standard settings (0.2 mm layer height, 15% infill). Actual print time varies based on your printer speed, layer height, and infill density.
What file format is Karambit available in?
Karambit is available in STL format. These files can be opened and sliced using free software such as Cura, PrusaSlicer, Bambu Studio, or OrcaSlicer for FDM printing, or ChiTuBox and Lychee Slicer for resin printing. The download is provided through MakerWorld.
Is Karambit free to download?
Yes, Karambit is available as a free download through MakerWorld. Always check the license on the original platform to understand commercial use, remixing, and attribution requirements.
No ratings yet
No comments yet – be the first!

Similar Models

6 Suggestions
Crescent Wrench Knife
Crescent Wrench Knife
by Logeno
↓ 7 ♥ 6
Wednesday Knife
Wednesday Knife
by 3DPrintsForYou
↓ 101 ♥ 128
Thorfinn's Knives
Thorfinn's Knives
by JaykMakes
↓ 425 ♥ 181
The Joker Undead Knife
The Joker Undead Knife
by 3DPrintsForYou
↓ 8 ♥ 11
Machete Chopper
Machete Chopper
by DubstepPenguin
↓ 28 ♥ 23
Green Lantern Undead Knife
Green Lantern Undead Knife
by 3DPrintsForYou
↓ 5 ♥ 8
Feed Blog Slicer Cost Calculator Image Search Submit Kontakt Discord ☕ Buy me a coffee
· Impressum · Privacy
DE EN FR ES IT NL

Add to Collection