Thingiverse
KerfMaker XL
10
Downloads
19
Likes
0
Makes
Enlarged version of KerfMaker allowing larger dadoes, for half lap picture frames or other projects with horizontal tenon.
Original Kerfmaker XL
Blade width max: 9mm/0.38 in 9mm /0.38 in
Tenon/Dado max 53mm/2.1 in 88mm/3.44 in
Parts to be printed:
Bottom-1
MIddle-1
Improved Thumbwheel -2 (I found the original too smooth to really get a grip, but the photos only show the original)
from https://www.thingiverse.com/thing:1345031
Top-1
Pin-1 (optional)
Hardware
2x M4 hex nuts
2x M4x20mm hex bolts
magnet (optional for the Bottom)
Assembly
1. Glue nuts into each Thumbwheel. I prefer epoxy as CA has a tendency to fill the threads by capillary action in my hands.
2. Insert thumbwheel into the center of Top with the nut facing upwards.
3. S
Original Kerfmaker XL
Blade width max: 9mm/0.38 in 9mm /0.38 in
Tenon/Dado max 53mm/2.1 in 88mm/3.44 in
Parts to be printed:
Bottom-1
MIddle-1
Improved Thumbwheel -2 (I found the original too smooth to really get a grip, but the photos only show the original)
from https://www.thingiverse.com/thing:1345031
Top-1
Pin-1 (optional)
Hardware
2x M4 hex nuts
2x M4x20mm hex bolts
magnet (optional for the Bottom)
Assembly
1. Glue nuts into each Thumbwheel. I prefer epoxy as CA has a tendency to fill the threads by capillary action in my hands.
2. Insert thumbwheel into the center of Top with the nut facing upwards.
3. S
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign inNo comments yet – be the first!
