Thingiverse
Key Hook Mount
1
Downloads
0
Likes
0
Makes
This is a mount for your keys!! It is a relatively quick print that holds 4 key hooks. Once you've removed the supports off of the hooks, I also recommend using some sand paper of varying grits to smooth it out. With that aside, I do hope you find this design to be very useful. Which, if you do like it, please consider giving this design a like and sharing it with others whom you think would like to print this.
(Screws needed: (14) #12-24 x 1-1/4 Phillip Pan Head Sheet Metal Screws)
Filaments used: Overture PLA(Black and White)
Main Settings:
1) No brim.
2) Supports needed for the hooks. I recommend using tree supports.
3) 15% Gyroid infill for the mount and 95% Gyroid infill for the hooks.
4) 2 perimeters(walls).
5) .2mm Layer Height.
Feel free to support me financially by following this link: https://buymeacoffee.com/devilish3dprints - your support truly is appreciated :)
Once there, you can also buy a license to sell the stuff that I make! (License is limited to the sellin
(Screws needed: (14) #12-24 x 1-1/4 Phillip Pan Head Sheet Metal Screws)
Filaments used: Overture PLA(Black and White)
Main Settings:
1) No brim.
2) Supports needed for the hooks. I recommend using tree supports.
3) 15% Gyroid infill for the mount and 95% Gyroid infill for the hooks.
4) 2 perimeters(walls).
5) .2mm Layer Height.
Feel free to support me financially by following this link: https://buymeacoffee.com/devilish3dprints - your support truly is appreciated :)
Once there, you can also buy a license to sell the stuff that I make! (License is limited to the sellin
Devilish3DPrints also publishes on
32 additional models across 2 more platforms
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign inNo comments yet – be the first!
