Slicer Discord
Keychain Mini Kazoo  – 3D printable model from MakerWorld MakerWorld
Music

Keychain Mini Kazoo

by Sungo · Music
212 Downloads
70 Likes
128 Makes
Go to Model
It doesn't matter if you want to play it in a concert, have fun with it, or just want to annoy someone. This is the instrument for you! I designed it to be as portable and practical as possible. It's easy to assemble, and everything is press-fit.For the membrane, I used a thin plastic bag, the thinner, the better. You can use something like a thin trash bag.But the bought membranes also work.To assemble it:Place the piece of plastic bag over the opening of the body.Take the tear-shaped ring and lay it on top.Press the ring down into the opening (you might need to use some force).Cut off the excess plastic.Test the kazoo. You need to make a humming sound into the short end, not just blow into it.If it doesn't make a buzzing sound, take your pinky finger or the back of a pencil and slightly indent the membrane.(Don't be too harsh. It's better to be gentle and repeat this step until you get a good result.) If the membrane tears at any point, just pop out the ring with
Category
Music
Source
MakerWorld
Published
Updated
What you need to print this: Beginner Low confidence
Single piece
Supports 1/3
Assembly 0/3
Settings 1/3
Bed size 0/3
Post-process 0/3
Printer
FDM / FFF
File format
STL
Material
PLA
Min. bed size
50 mm (Small)
Software
Cura, PrusaSlicer, or similar
Same designer, more platforms

Sungo also publishes on

15 additional models across 1 more platforms

Verified by matching model titles across platforms.
No ratings yet
No comments yet – be the first!

Similar Models

6 Suggestions
Feed Blog Slicer Cost Calculator Image Search Submit Kontakt Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Add to Collection