Keys wall hanger

A keys wall hanger to hang your keys and a top tray, this hanger has 6 keys slots and the tray for your shades, garage remote, or anything that can not be hanged. Bill of Materials: 12 pieces M3x22mm - to secure the key holder bars (2 bolts on each bar) 5 pieces M3x32mm - to secure the top tray to the back plate. 2 wall nails to hand the plate on the walls OR you can use double face tape if you prefer. Assembly: You only need to screw the bolts from the back of the plate into the tray and hanger bars, each has its own corresponding space to fit in. in case you need assistance please contact me for help. Before you print: print plate should be cleaned with soapy water or IPA. machine should be properly maintained and lubricated. machine should be pre calibrated, Auto bed level, and pressure advance. Filament Flow rate should calibrated. Filament temperature should be optimized. Support filament materials is recommended (as i do most of my prints using support material filament for clean layers and easier support removal)