Kickers

Filaments Used: PLA BambuLab Basic Black PLA BambuLab Basic Blue PLA BambuLab Basic Red PLA BambuLab Basic Jade White Swap Instructions: Start with Black At layer #9 (0.8mm) swap to Blue At layer #13 (1.12mm) swap to Red At layer #20 (1.68mm) swap to Jade White for the rest. The Model is 200x150mm in sizeYou need a different size:Remember, if scaling is desired, modify only the x and y axes; the z-axis must remain unchanged.You need an A1 Mini profile; if you are interested, simply send a message. You can find the matching Hueforge frame here.https://makerworld.com/en/models/2306996-picture-frame-150x200mm#profileId-2556629 Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmYou may print at higher layer heights below the Base Thickness of 0.48mmThe Max allowed Thickness is 2.96mm and the Actual Thickness is 2.72mm Boost MeDo you like my model?Then I would be incredibly grateful for your support in