King Lich

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm  The Model is 150x150mm in size  You may print at higher layer heights below the Base Thickness of 0.56mm  The Max allowed Thickness is 2.24mm and the Actual Thickness is 2.24mm Filaments Used: PLA Elegoo+ Black Transmission Distance: 0.3 PLA BambuLab Basic Blue Gray Transmission Distance: 3 PLA Devil Design Light Brown Transmission Distance: 1.6 PLA BambuLab Basic Jade White Transmission Distance: 5 This print uses 4 unique filaments Swap Instructions: Start with Black At layer #9 (0.8mm) swap to Blue Gray At layer #12 (1.04mm) swap to Light Brown At layer #13 (1.12mm) swap to Jade White for the rest.