Kitchen Storage Container Push Button Locking Lid

If you like my work and enjoy my models please consider leaving me a tip/donation, It helps me to continue creating awesome models for you for free.https://paypal.me/muddymaker You will need;3---M3x25mm socket head cap screw (SHCS) fasteners for the container.3---M3x10mm socket head cap screw (SHCS) fasteners to attach the handle to the lid.3---0.5mmx5mmx25mm helical compression springs for the latches.3---2mmx25mm stainless steel dowel pins to attach the latches to the lid.3---2mmx14mm stainless steel dowel pins to attach the push rods to the latches. Dimensions of the container are:External-H230mmxØ165mmInternal-H180mmxØ129mm If you are having a hard time sourcing the required bits in your country all of the hardware can be obtained at BambuLab's website under the maker's supply section.INSTRUCTIONS:STEP 1.Once all of the parts are printed you will need to clean out the dowel pin holes in the lid with a 2mm drill bit but do not oversize the hole, you just want it large enough