KOBRA3

Print at 100% infill with 0.08mm layer height with 0.16mm base layer Model is 113.33x170mm in size Can print at higher layer heights below the minimum depth of 0.56mm Max depth is 2.2mm and actual depth is 2.3mm Filaments used: PLA smartfil Basic Black Transmission Distance: 0.6 PLA smartfil Black Transmission Distance: 0.4 PLA smartfil White Transmission Distance: 6 PLA smartfil Red Transmission Distance: 2.3 PLA smartfil Yellow Transmission Distance: 5.8 This print uses 5 unique filaments Swapping instructions: Start with black On layer #2 (0.24mm) switch to black On layer #9 (0.8mm) switch to white On layer #14 (1.2mm) change to black On layer #19 (1.6mm) change to red On layer #26 (2.16mm) change to yellow On layer #27 (2.24mm) change to White for the rest.