Kumoko

This is Kumoko from So im a spider, so what? this is based off a screenshot from the anime.This one has a pink tint to it. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 230x129.38mm in sizeYou may print at higher layer heights below the Base Thickness of 0.64mmThe Max allowed Thickness is 2.4mm and the Actual Thickness is 2.24mmFilaments Used: #080a0d PLA PolyLite Black Transmission Distance: 0.3 #8c9099 PLA PolyLite Grey Transmission Distance: 1 #f5547c PLA BambuLab Basic Hot Pink Transmission Distance: 3.9 #e2dedb PLA PolyLite White Transmission Distance: 5This print uses 4 unique filamentsSwap Instructions: Start with Black At layer #12 (1.04mm) swap to Grey At layer #14 (1.2mm) swap to Hot Pink At layer #18 (1.52mm) swap to White for the rest. Those are just the filaments i had on hand. use whatever you want.Do not decrease the size of this one, if you do it will be less detailed and the pink will be more prominent. Boost Meboost me if y