MakerWorld
2D Art
Zum Modell
Kyoto map
54
Downloads
35
Likes
29
Makes
i add also a bigger one, unfortunately more print time but more detail Simple print, only 2 color Project: kyotomap.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 99.57x140mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 1.4mmFilaments Used: PLA PolyTerra Charcoal Black Transmission Distance: 0.3 PLA Hatchbox White Transmission Distance: 10This print uses 2 unique filamentsSwap Instructions: Start with Charcoal Black At layer #13 (0.96mm) swap to White for the rest.
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!
