Lab Rax Post Cable Manager

## Cable Manager for Lab Rax 10" Rack v1.0.0An addon for the excellent Lab Rax 10" Server Rack - 5U https://makerworld.com/en/models/1294480-lab-rax-10-server-rack-5u#profileId-1325352 from @mklementsClean up your homelab cables with this practical add-on for Lab Rax bolted rack posts. Features 5 evenly-spaced hooks (6mm opening) for organizing cables along your rack. * Key Features:**- Mounts using existing Lab Rax post holes (M6 bolts)- 5 hooks with 6mm cable opening- Reuses existing nuts from bolted Lab Rax- Tested on upper posts (should work on lower posts too) **⚠️ IMPORTANT:** Install your rack handles FIRST - this plate blocks access to handle nuts! **What You Need:**- M6×16 bolts (M6×12 might be too short)- 2 nuts per mounting point (if using heat-set brass insert version) **Quick Specs:**- Plate: 170×25×3mm- Hooks: 20mm high, 15mm wide, 3mm thick **Print Settings I Used:**- Orientation: Upright- Supports: Yes (required)- Filament: PLA works, but PETG/ABS recommended fo