Thingiverse
LACK enclosure filament feedthrough
door fredkylam
3
Downloads
1
Likes
0
Makes
Having assembled my LACK printer shelf (and eventually enclosure), I need to feed the filament from a drybox through the top of the shelf in a clean and tidy manner.
This thing screws together though a 12.5mm (half inch) hole drilled through the top of the shelf, and tightened with a coin in the printed slots at the flanged end of both parts.
The feedthrough accepts a 4mm ptfe tube to be inserted as a low friction guide for the filament.
Filament PETG (or PLA)
Temperature 230°/65°C
Infill 100%
Support none
Adhesion Brim 5mm
If you use Cura, set "Slicing Tolerance" to "Exclusive" for easier threading.
This thing screws together though a 12.5mm (half inch) hole drilled through the top of the shelf, and tightened with a coin in the printed slots at the flanged end of both parts.
The feedthrough accepts a 4mm ptfe tube to be inserted as a low friction guide for the filament.
Filament PETG (or PLA)
Temperature 230°/65°C
Infill 100%
Support none
Adhesion Brim 5mm
If you use Cura, set "Slicing Tolerance" to "Exclusive" for easier threading.
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!
