Thingiverse
Lamp base
door SlimShader
67
Downloads
139
Likes
0
Makes
So I started making a vase, and managed to pull the bottom of it off when removing the print from the bed....so it's a lamp shade now and needed a base!
This shade shown in the pictures using thing:37327 by Toussaint Jongen, minus the bottom. It's printed in Taulman Nylon 618, dyed with Rit 'Fuscia' Nylon dye.
The base can be printed in either ABS or PLA, and has a cable escape hole in the side, and a simple mount for a lamp fitting to be hot glued in place. In the pictures, the base is printed in Gold PLA at 0.15mm layer height.
Timelapse: http://youtu.be/49qzAgGCLUY
https://sites.google.com/site/321soldersucker/home/random-ramblings/moretaulmannylon618testing-singleperimetersandde-lamination
This shade shown in the pictures using thing:37327 by Toussaint Jongen, minus the bottom. It's printed in Taulman Nylon 618, dyed with Rit 'Fuscia' Nylon dye.
The base can be printed in either ABS or PLA, and has a cable escape hole in the side, and a simple mount for a lamp fitting to be hot glued in place. In the pictures, the base is printed in Gold PLA at 0.15mm layer height.
Timelapse: http://youtu.be/49qzAgGCLUY
https://sites.google.com/site/321soldersucker/home/random-ramblings/moretaulmannylon618testing-singleperimetersandde-lamination
SlimShader publiceert ook op
26 extra modellen op 1 andere platforms
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!
