Large Ancient Tree HueForge with frame

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 200x200mm in sizeYou may print at higher layer heights below the Base Thickness of 0.48mmThe Max allowed Thickness is 2.24mm and the Actual Thickness is 1.92mm Filaments Used: #000000 PLA BambuLab Basic Black Transmission Distance: 0.6 #4c5f71 PLA BambuLab Basic Blue Gray Transmission Distance: 3 #906b4b PLA BambuLab Matte Caramel Transmission Distance: 1.5 #57463c PLA BambuLab Matte Dark Brown Transmission Distance: 2 #ca9bb7 PLA BambuLab Matte Sakura Pink Transmission Distance: 2.4 #c00d1e PLA BambuLab Basic Red Transmission Distance: 4 #56b7e6 PLA BambuLab Matte Sky Blue Transmission Distance: 1.3 #ffffff PLA BambuLab Basic Jade White Transmission Distance: 5This print uses 8 unique filaments Swap Instructions: Start with Black At layer #6 (0.56mm) swap to Blue Gray At layer #9 (0.8mm) swap to Caramel At layer #10 (0.88mm) swap to Dark Brown At layer #12 (1.04mm) swap to Sakura Pink At layer