Sun through Tree HueForge with frame

I've included a mini frame for this. It prints in less than an hour and the print can be superglued to the frame or I have been using glue dots that are mostly used in scrapbooking. The frame prints great with the satndard .2 print profile. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.24mm The Model is 133.33x200mm in sizeYou may print at higher layer heights below the Base Thickness of 0.48mmThe Max allowed Thickness is 2.24mm and the Actual Thickness is 2.16mm Filaments Used: #000000 PLA Bambu Labs Black Transmission Distance: 0.1 #ffffff PLA Bambu Labs Jade White Transmission Distance: 5.9 #ffffff PLA Bambu Labs Jade White Transmission Distance: 5.9 #b60e14 PLA Bambu Labs Red Transmission Distance: 3.4This print uses 4 unique filaments Swap Instructions: Start with Black At layer #6 (0.64mm) swap to Jade White At layer #12 (1.12mm) swap to Black At layer #17 (1.52mm) swap to Jade White At layer #19 (1.68mm) swap to Red for the rest.