Slicer Discord
Laser Barometer – 3D-Druckmodell von Thingiverse Thingiverse

Laser Barometer

19 Downloads
27 Likes
1 Makes
Zum Modell
This contraption is currently one of the most sensitive barometers on the planet earth... That is until YOU build one too! With a soup can, a balloon and a cheap laser pointer you can make a barometer that is so sensitive it's indicator will sweep across a scale of well over a meter down a short hallway. In fact it's so sensitive that even touching the can will make it swing the laser quickly upwards due to the heat of your hand! Aimed down a hallway you can see the weather outside change the reading second by second. Aim it across a gym or warehouse for even more dramatic results and a faster longer beam path! Print the parts, assemble them as shown using wire for hinges and you too can watch the waves of the atmosphere thin and thicken above you. All readings are inverted of course since the balloon rises as air pressure drops. To turn on your laser press the button down and slide it under the ring so it stays on. If you have trouble inserting your laser into the ring remove the fron
Quelle
Thingiverse
Was du zum Drucken brauchst: Anfänger Niedrige Konfidenz
Einteilig
Supports 1/3
Zusammenbau 0/3
Einstellungen 1/3
Druckbett 0/3
Nachbearbeitung 0/3
Drucker
FDM / FFF
Dateiformat
STL
Material
PLA
Mindest-Druckbett
50 mm (Klein)
Software
Cura, PrusaSlicer o. Ä.
Gleicher Designer, mehr Plattformen

Peterthinks veröffentlicht auch auf

69 zusätzliche Modelle auf 2 weiteren Plattformen

Verifiziert durch übereinstimmende Modelltitel über Plattformen hinweg.
Noch keine Bewertungen
Noch keine Kommentare – sei der Erste!

Ähnliche Modelle

6 Vorschläge
Feed Blog Slicer Kostenrechner Bildersuche Einreichen Kontakt Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Zur Sammlung hinzufügen