Thingiverse
Laser Mount
door k4en
42
Downloads
28
Likes
0
Makes
This part was inspired by the Raspberry Pi Cat Laser Toy 2.0 by Tony D. He reluctantly glued his laser mount to pan/tilt. This mount provides a snap in holder for the laser diode and the pan/tilt device.
I drilled and tapped the hole under the laser diode for a 3 mm screw. Insert a nylon screw of a length such that head is flush with bottom of mount just as the threaded end begins to touch the laser diode.
Laser Cat Toy: https://www.youtube.com/watch?v=FRvKtcemXkM
Laser Diode: https://www.adafruit.com/products/1054
Pan-Tilt Kit: https://www.adafruit.com/products/1967
I drilled and tapped the hole under the laser diode for a 3 mm screw. Insert a nylon screw of a length such that head is flush with bottom of mount just as the threaded end begins to touch the laser diode.
Laser Cat Toy: https://www.youtube.com/watch?v=FRvKtcemXkM
Laser Diode: https://www.adafruit.com/products/1054
Pan-Tilt Kit: https://www.adafruit.com/products/1967
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!