Slicer Discord
Laser pointer robot (Remotelly controlled + Arduino + Python – 3D-Druckmodell von Creality Cloud Creality Cloud

Laser pointer robot (Remotelly controlled + Arduino + Python

von
0 Downloads
0 Likes
0 Makes
Zum Modell
This is, a 2 axis (pan and tilt) Wi-Fi/internet remotely controlled robot. Completely OPEN SOURCE (all the design files and control code are fully available for everyone to modify or adapt it to its needs) and with a 3D printed frame. It can hold: small cameras, laser pointers, flashlights, toy guns, a stick…. Everything you want to move or point to.   This 3D printed laser/torch/camera pointer has been created using common and affordable elements from the 3D printed World (NEMA 17 motors, Linear bearings, timing belts...)   The idea was to create a reliable, fast, modifiable and accurate "pointer" robot. Fix to this robot a small camera, webcam, flashlight, sensor... and control it remotely. The Python code will let you move the robot, autonomously, following pre-set movement patterns with precision. Convert it into a remotely operated webcam: Control it using a Xbox/ PS4 controller: The control APP has been created with Python Take a look at it: Laser pointer 3D interactive model We have written a detailed assembly guide. Arduino and Python code can be found on its project webpage : https://www.jjrobots.com/remotely-controlled-laser-pointer/ The control code has been written in PYTHON, and it has been thoroughly explained and commented for easy understanding. There are several control examples here All the links to code, videos, specifications, assembly guide...etc can be found here:  https://www.jjrobots.com/remotely-controlled-laser-pointer/ NEW!: Added Xbox/PS4 controller. Now you can control the laser pointer robot using your PS4/Xbox controller ************************************************************************************************ If you want to save the hassle of getting the different elements from different sources and want them all fast, create your own custom Robotic KIT here (and add what you really need) ************************************************************************************************ This robot uses the same electronics and moto
Quelle
Creality Cloud
Veröffentlicht
Was du zum Drucken brauchst: Mittel Niedrige Konfidenz
Warum?
2 Farben
Einteilig 2 Farben / AMS Hardware nötig
Supports 1/3
Zusammenbau 0/3
Einstellungen 2/3
Druckbett 0/3
Nachbearbeitung 1/3
Drucker
FDM / FFF
Dateiformat
STL
Material
PLA
Farben
2 (AMS/MMU empfohlen)
Nachbearbeitung
Hardware
Software
Cura, PrusaSlicer o. Ä.
Noch keine Bewertungen
Noch keine Kommentare – sei der Erste!

Ähnliche Modelle

6 Vorschläge
Feed Blog Slicer Kostenrechner Bildersuche Einreichen Kontakt Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Zur Sammlung hinzufügen