Thingiverse
Leaf Ejector
door chiwi
36
Downloads
28
Likes
0
Makes
The Leaf Ejector, like most items of this type, is intended to separate water from leaves & other solid matter within the guttering downpipe. It is designed to be inserted within RECTANGULAR downpipes of 98mm x 50mm internal cross section.
When correctly fitted, a small "tray" will project from the front of the downpipe. There are a couple of studs on either side of the tray. These do double duty. Firstly to prevent any possibility that the Leaf Ejector could fall into the downpipe. Secondly they function as mounting studs for fitting a basket (not yet available) for when its not desirable to just have the leaf litter expelled willy nilly (like onto your nice clean deck for example).
This design may not be suitable if you:
~have a problem with large quantities of leaves
~have downpipes that are NOT rectangular in cross-section
If this is the case, you may need a different solution. If so, try checking out https://www.thingiverse.com/thing:1685566
-- x --
To install
When correctly fitted, a small "tray" will project from the front of the downpipe. There are a couple of studs on either side of the tray. These do double duty. Firstly to prevent any possibility that the Leaf Ejector could fall into the downpipe. Secondly they function as mounting studs for fitting a basket (not yet available) for when its not desirable to just have the leaf litter expelled willy nilly (like onto your nice clean deck for example).
This design may not be suitable if you:
~have a problem with large quantities of leaves
~have downpipes that are NOT rectangular in cross-section
If this is the case, you may need a different solution. If so, try checking out https://www.thingiverse.com/thing:1685566
-- x --
To install
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!
