Thingiverse
Leapfrog Creatr nozzle cooler
von 3dwkl
6
Downloads
5
Likes
1
Makes
Nozzle cooler for a leapfrog creatr designed for a 50mm radial fan.
Can be mounted using an existing screw on the print head.
I've printed this with little support (touching bed). Sliced with Cura. After printing you'll need to remove some material around the mounting hole where the fan slides in.
Did some test with a 45 degree overhang test design with and without a fan. See the picture for the results. Black = ABS, pink = PLA.
Can be mounted using an existing screw on the print head.
I've printed this with little support (touching bed). Sliced with Cura. After printing you'll need to remove some material around the mounting hole where the fan slides in.
Did some test with a 45 degree overhang test design with and without a fan. See the picture for the results. Black = ABS, pink = PLA.
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!
