LED Clock - MICRO [ powered by WLED ]

Smallest version (24x41mm PCB) of the LED clock project by @imeszaros. Led Clock - MICRO (24x41mm PCBs)Smallest version of the LED clock project by @imeszaros. You can print this version even on a A1 Mini :).For more details please check the github fork repository: https://github.com/mariusmym/LedClock-ResizedFiles uploaded here are for the 24x41mm version. LEDs used for this version are TCWIN TX1812ZN (or WS2812B-2020 ). I used TCWIN TX1812ZN LEDs in the original design, because they were cheaper at the time. WS2812b-2020 have the same pinout, but be sure you place them in the right way. Keep in mind that the orientation mark from the silkscreen match the orientation mark for TCWIN which indicates the DIN pin, not the GND pin, so just be sure to match the GND pin of the PCB with the one of the LED and you'll be fine. (I did the test and it works. You can even use them with stencil made for TCWIN TX1812ZN footprint). <