LED-Lamp "Stringy"

This LED lamp consists of four printable parts for the box and and 34 for the translucent front covers. The box consists of two parts which are clipped and screwed together. The front is also printed as two parts and is just glued together. The translucent windows are printed in clear PLA. Try to print on of them first and try if it fits as the clearance may vary between 3d printers. The box has one round hole on the side for a 12v jack and a rectangle hole for a on/off toggle switch. Inside you can mount a small LED dimmer which can be controlled over WIFI. If you dont want to build your own dimmer you can also just use the one that comes with the LED strip. The LED strip is also just glued inside by its own adhesive.

What you need:

12V Jack (https://www.amazon.de/St%C3%BCck-Mount-Buchse-Anschluss-Sockel/dp/B00H8WFGAM/ref=sr_1_13?__mk_de_DE=%C3%85M%C3%85%C5%BD%C3%95%C3%91&dchild=1&keywords=12v+jack&qid=1591910824&sr=8-13)

toggle switch (https://www.amazon.de/Weinhsl-Kcd11-1