Thingiverse
Led matrix bracket
by avanhanegem
10
Downloads
9
Likes
0
Makes
A bracket to join 4 led matrix panels (32x32 leds; 4mm led spacing) together to create a 64x64 panel.
Holes are 3mm on the bracket; you can drill the holes to 4mm to give you some flex in aligning the gap between the panels.
Mounting in a U-loop (U-mapper) pattern or as a straight matrix are possible.
Print at 0.2mm layer height should be fine. No specials like support needed.
LED panels used in this build: PH4-16S2M2121-v1.1; 32x32 leds; 4mm spacing
Holes are 3mm on the bracket; you can drill the holes to 4mm to give you some flex in aligning the gap between the panels.
Mounting in a U-loop (U-mapper) pattern or as a straight matrix are possible.
Print at 0.2mm layer height should be fine. No specials like support needed.
LED panels used in this build: PH4-16S2M2121-v1.1; 32x32 leds; 4mm spacing
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign inNo comments yet – be the first!
