LED Matrix Prototyping Mount

This is a simple prototyping mount to hold two SparkFun LED Matrix breakout boards. I'm working on a larger LED Matrix setup, but wanted to do some software prototyping using two of the MAX7219 LED controller ICs. Here is the parts list and purchase links:

Hardware:
(1) [M2.5 Tap](http://www.mcmaster.com/#8305a31/=qgpmfo)
(8) [M2.5 x 5mm Machine Screws](http://www.mcmaster.com/#91292a009/=qgpmpz)

Electrical:
(2) [SparkFun LED Matrix Kit](https://www.sparkfun.com/products/11861)
(4) [0.1" Crimp Connector Housing 1x5](http://www.pololu.com/product/1904)
(15) [Female Crimp Pins](http://www.pololu.com/product/1930)
(5) [Male Crimp Pins](http://www.pololu.com/product/1931)
(1) [Crimping Tool](http://www.pololu.com/product/1929)
(N/A) Wire and Wire Strippers
(N/A) Soldering Iron

NOTE: You will also need a microcontroller (or anything with Digital Input/Output pins) to interface with the LED Matrix controller ICs. I personally have been using an Arduino.